Products & services

Everything between the mains supply and the finished product.

One portfolio, organised the way a machine is actually built — control layer, drive layer, execution layer — plus the engineering, integration and lifetime services that turn it into a solution rather than a shipment.

Layer 01 · Control Layer

Where the machine decides: the controllers that run motion and process logic side by side, the engineering software that programs them, the panels operators work on, and the I/O and industrial Ethernet that connect everything.

Layer 02 · Industrial Controllers

Large modular PLCs with motion, process and IT/OT convergence built in.

Layer 03 · Drive Layer

Where power becomes controlled motion: single-axis, dual-axis, common DC bus and low-voltage servo drives, variable frequency drives and stepper drives — from 0.

Layer 04 · Servo Drives

Single-axis, dual-axis and common DC bus systems from 0.

Layer 05 · Execution Layer

Where the motion actually happens: permanent-magnet servo motors with the feedback, braking and enclosure options the axis needs — up to 57.

Layer 06 · Servo Motors

High-torque-density 8-pole motors up to 57.

Layer 07 · Engineering Software

One engineering environment for configuration, programming, commissioning and diagnostics.

Layer 08 · HMI Panels

High-resolution touch panels from the same engineering platform.

Layer 09 · Field I/O

IP67 cabinet-free I/O with IO-Link for machines that have no room for a cabinet.

Layer 10 · Variable Frequency Drives

Vector-controlled drives with redundant ring Ethernet networking.

Layer 11 · Stepper Drives

Closed-loop stepper drives for cost-sensitive axes.

Layer 12 · Industrial Ethernet

Deterministic switches with hardware PTP time synchronisation.

Solution

Commissioned on your machine, supported for life

Product catalogue

Pick the layer, then pick the series.

Layer 01

Control Layer

Where the machine decides: the controllers that run motion and process logic side by side, the engineering software that programs them, the panels operators work on, and the I/O and industrial Ethernet that connect everything.

3 series
ICC-P Series Large Modular PLC
ICC-P020ERM · 030ERM · 050ERM · 080ERM · 0100ERM

ICC-P Series Large Modular PLC

128 axes over a redundant Ethernet ring.

  • Up to 128 synchronised axes over standard industrial Ethernet
  • Device-level redundant ring topology across two independent Ethernet ports
  • Embedded energy-storage module — no back-up battery required
ICD-B Series I/O Modules
ICD-B · Ethernet adapter + 12 mm I/O slices

ICD-B Series I/O Modules

12 mm slices that cut cabinet wiring.

  • Ultra-slim 12 mm module width — higher channel density per DIN rail
  • Single-row push-in connection with removable terminal blocks
  • Hot-swap modules for maintenance without rewiring the rail
Layer 02

Industrial Controllers

Large modular PLCs with motion, process and IT/OT convergence built in.

1 series
Layer 04

Servo Drives

Single-axis, dual-axis and common DC bus systems from 0.4 kW to 132 kW per axis.

7 series
Layer 05

Execution Layer

Where the motion actually happens: permanent-magnet servo motors with the feedback, braking and enclosure options the axis needs — up to 57.5 kW, with UL and CE versions for export programmes.

2 series
ICM-LM Series Servo Motor
ICM-LM · mid/low inertia · 200+ winding variants

ICM-LM Series Servo Motor

Low cogging, IP66, up to 10 000 rpm.

  • High torque density, low cogging torque and high overload capability
  • Compact frame for installation-space-critical machines
  • Maximum speed up to 10 000 rpm
Layer 06

Servo Motors

High-torque-density 8-pole motors up to 57.5 kW with optional holding brakes.

1 series
ICM-I Series Servo Motor
ICM-I21 · ICM-I30

ICM-I Series Servo Motor

High torque density up to 57.5 kW.

  • Broad power coverage: ICM-I21 from 13.2 to 31.1 kW, ICM-I30 from 33.9 to 57.5 kW
  • High overload capability with peak torque ≈ 2 × rated torque (70→140 Nm, 180→360 Nm, 305→610 Nm)
  • High speed output up to 2400 rpm (rated speed 1800 rpm)
Layer 07

Engineering Software

One engineering environment for configuration, programming, commissioning and diagnostics.

1 series
Layer 08

HMI Panels

High-resolution touch panels from the same engineering platform.

1 series
ICP-T Series HMI Panel
ICP-T

ICP-T Series HMI Panel

High-resolution panels from the same platform.

  • High-resolution, wide-view display with accurate colour reproduction
  • Clear iconography and shallow menu depth for fast operator adoption
  • High-performance CPU with responsive multi-touch and gesture support
Layer 09

Field I/O

IP67 cabinet-free I/O with IO-Link for machines that have no room for a cabinet.

1 series
ICD-S Series IP67 Field I/O
ICD-S

ICD-S Series IP67 Field I/O

Mount it on the machine, not in a cabinet.

  • IP67 protection — stable operation in wet, dusty and vibrating environments
  • Cabinet-free field installation saves enclosure space and wiring
  • IO-Link communication for easy setup, diagnostics and device management
Layer 10

Variable Frequency Drives

Vector-controlled drives with redundant ring Ethernet networking.

2 series
Layer 11

Stepper Drives

Closed-loop stepper drives for cost-sensitive axes.

1 series
Layer 12

Industrial Ethernet

Deterministic switches with hardware PTP time synchronisation.

1 series

Services

What we do around the hardware.

Product is half of it. The other half is what happens after you send us the machine specification.

01

Solution Engineering

We size the axes, choose the drives and design the network before you order a single part.

Send us your cycle diagram, load data or CAD files and our engineers return a selection proposal: motor and drive sizing, acceleration and duty-cycle checks, DC bus and braking strategy, network topology and I/O layout. You get a bill of materials and a commissioning plan, not just a price list.

02

Machine & Line Integration

From a single axis to a 256-axis line, engineered as one system.

We deliver matched controller + drive + motor + HMI + I/O packages that are pre-verified as a system, with one engineering project, one firmware baseline and one wiring concept. That removes the integration risk of combining vendors, and it is what makes a complete automation solution rather than a box of parts.

03

Commissioning & On-Site Support

Remote or on-site engineers to get the machine running and the operators confident.

Parameter sets, motion tuning, network configuration and start-up support — delivered remotely or on site, in the customer language where possible. We document what we changed so the next machine is faster.

04

OEM & Custom Development

Custom enclosures, connectors, labelling and firmware behaviour.

Because Sureton Group also owns a precision metal manufacturing division, we can supply drives and controllers integrated into custom housings, mounting plates, heatsinks and cable assemblies — produced by our sister division at Sureton Precision Manufacturing. Private-label firmware options and custom parameter defaults are available for volume programmes.

05

Export, Logistics & Compliance

CE / UL / RoHS documentation, packing and worldwide shipping handled by us.

We ship worldwide with the documentation your customs and compliance teams ask for: declarations of conformity, EMC and LVD test reports, UL certificates and RoHS statements. Components are packed for long sea freight and export-crated where required.

06

Spare Parts & Lifetime Service

Parts, repair and technical support for the life of the machine.

Consumable and critical spares held for the full series lifecycle, firmware and parameter back-up, repair or replacement units, and a technical contact who already knows your machine. Long product lifecycles and stable part numbers are a deliberate part of the platform design.

Next step

Send us your machine. We will send back a system.

Share a cycle diagram, a load table or a CAD file. Our engineers reply with a sizing proposal, a bill of materials and a commissioning plan — every enquiry is answered by an engineer within one business day.