Microns and milliseconds

Electronics & Semiconductor

Semiconductor and precision electronics equipment is unforgiving: hard and brittle materials, thin films, and tolerances measured in microns. It is also where synchronised motion and measurement on a shared time base pays off most.

±100 nstime synchronisation accuracy
4machine types in this solution
4recommended product series

The challenge

  • Cutting brittle materials without micro-cracks
  • Micro-level positioning of camera modules and wafers
  • Clean-room compatible hardware and cabling
  • High mix, low volume production with fast changeover

Our approach

  • Hardware PTP time synchronisation (±100 ns) between motion and metrology
  • ICM-D3 drives with 200–500 VAC input for globally sourced equipment
  • ICM-S closed-loop stepper drives for cost-sensitive auxiliary axes
  • Industry-standard EtherNet/IP servo bus with ring topology for resilience

What you get

  • Higher first-pass yield on hard and brittle material processes
  • One hardware platform across multiple machine generations
  • Predictable spare-part supply

Machine types

Equipment already running on this platform.

Multi-wire saw

High-speed reciprocating wire cutting of hard and brittle materials into thin wafers.

Wafer handling / loader

Clean-room robotic handling of wafers between process steps.

Camera module stamping take-out unit

Automated collection of stamped parts into cleaning carriers.

Camera module cleaning & unloading machine

Automated transfer of cleaned modules to the unload position.

Recommended hardware

The standard build for this industry.

Starting point, not a straitjacket — we re-size every axis against your actual cycle and load data.

Next step

Send us your machine. We will send back a system.

Share a cycle diagram, a load table or a CAD file. Our engineers reply with a sizing proposal, a bill of materials and a commissioning plan — every enquiry is answered by an engineer within one business day.